APS SUB 10 User Manual download pdf (Page 7)

TECHNICAL SPECIFICATIONS

Active Studio Subwoofer SUB 10

Type

Active – Class D power amplifier Hypex: 400 W @ 4 

Free Field Frequency Response



 2.5 dB: 19 Hz  90 Hz

SPL in Free Field @ 1m

RMS: 108 dB (single subwoofer)

Peak: 116 dB (pair of subwoofers)

Dimensions: Height  Width  Depta 39 cm  39 cm  40 cm (15.35’’ x 15.35’’ x 15.75’’)

Weight

24 kg (53 lbs)

Loudspeaker

Subbass Loudspeaker

 29 cm

Diaphragm: cellulose, surround: rubber

Amplifier

Subbass Loudspeaker Power Amplifier

400 W RMS @ 4  (270 W RMS @ 6



)

THD distortions

Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2

Max 0.04% 20Hz<f<20kHz, Pout = 1W

Calibrated Controls

Input Sensitivity Switch / VOLUME (8 positions)

-4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB

Input Sensitivity Switch / VOLUME (3 positions)

-20dB, -10dB, 0dB

Low-pass filter Switch CUT OFF

40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz

Filters By-Pass Switch UNFILTERED (LFE)

Position down: filters ON

Position up: filters OFF

PHASE Switch

0 degrees, 180 degrees

STAND-BY Switch

Position down: active STAND-BY

Position up: continuous mode (Stand-by OFF)

Inputs, Outputs

INPUT right ( R )and left ( L )

Two types (common socket Combo):

- XLR symmetrical (balanced)

- TRS symmetrical (balanced) “6.3 mm”

and RCA nonsymmetrical

Input impedance 10 k

OUTPUT, Loop Through

XLR symmetrical

Output impedance 100 

Protections

Subbass Loudspeaker Protection

Pop-free start and stop control

Power Amplifiers Protections

Overcurrent protection

Power Amplifiers Protections

Overvoltage protection

Signaling Devices

STAND-BY ON

Orange LED

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

APS SUB 10 User Manual Page 7

Comments to this Manuals